Calcium phosphate and titanium cranioplasty after total angular craniopagus separation.

Craniopagus separation requires careful planning and a multi-staged surgical approach, managed by a multidisciplinary team. Despite growing experience on surgical management, the long-term restoration of the cranial defect has been rarely discussed so far. Several alloplastic materials have been proposed as effective and safe solutions for cranioplasty even for pediatric patients, allowing for bone generation, good aesthetic results, and low complication rates. We report, for the first time, on a separated craniopagus child who underwent successful implant of a tailor-made system based on the combination of calcium phosphate ceramic reinforced with a titanium mesh.

Vertical Hemispherotomy: Contribution of Advanced Three-Dimensional Modeling for Presurgical Planning and Training.

Vertical hemispherotomy is an effective treatment for many drug-resistant encephalopathies with unilateral involvement. One of the main factors influencing positive surgical results and long-term seizure freedom is the quality of disconnection. For this reason, perfect anatomical awareness is mandatory during each step of the procedure. Although previous groups attempted to reproduce the surgical anatomy through schematic representations, cadaveric dissections, and intraoperative photographs and videos, a comprehensive understanding of the approach may still be difficult, especially for less experienced neurosurgeons. In this work, we reported the application of advanced technology for three-dimensional (3D) modeling and visualization of the main neurova-scular structures during vertical hemispherotomy procedures. In the first part of the study, we built a detailed 3D model of the main structures and landmarks involved during each disconnection phase. In the second part, we discussed the adjunctive value of augmented reality systems for the management of the most challenging etiologies, such as hemimegalencephaly and post-ischemic encephalopathy. We demonstrated the contribution of advanced 3D modeling and visualization to enhance the quality of anatomical representation and interaction between the operator and model according to a surgical perspective, optimizing the quality of presurgical planning, intraoperative orientation, and educational training.

Combining 3-Dimensional Electroanatomic Mapping and Cardiac Magnetic Resonance: A New Tool for Arrhythmogenic Cardiomyopathy.

We present the case of a 17-year-old asymptomatic boy with a diagnosis of arrhythmogenic cardiomyopathy. Merging of cardiac magnetic resonance imaging and three-dimensional electroanatomic mapping provided striking visualization of the association between structural and electrical alterations and guided the decision to implant an implantable cardioverter defibrillator. (Level of Difficulty: Intermediate.).

3D bioprinting in airway reconstructive surgery: A pilot study.

OBJECTIVES: Open surgery is a reliable choice for congenital subglottic stenosis, that represents the third most common congenital anomaly of the larynx. One of the procedures performed is anterior laryngotracheal reconstruction (LTR) with anterior rib graft. The objective of this preliminary study was to evaluate the potential of 3D printing technology for the realization of laryngo-tracheal scaffold in Polycaprolactone (PCL) implanted in vivo in ovine animal model. METHODS: A 3D computer model of a laryngeal graft and a tracheal graft was designed and printed with PCL through 3D additive manufacturing technology. The scaffolds were seeded with autologous mesenchymal stem cells and cultured in vitro for up to 14 days. Anterior graft LTR with 3D printed scaffolds was performed on 5 sheep. The animals underwent endoscopic examinations at the first, 3rd, 6th, and 12th weeks after surgery and before sacrifice. The integration of the material was evaluated by the pathologist. RESULTS: Two animals showed a favourable postoperative course and were sacrificed at 6 months postoperatively. In these cases, we observed endoscopically a complete integration of the cellularized PCL scaffold into the peri-implant tissues, and the pathologist found the growth of respiratory epithelium on the scaffold's inner surface. Other two animals showed a difficult post-operative recovery characterized by respiratory distress resulting in early sacrifice on postoperative days 31 and 33. In these animals we found a poor integration of the grafts into the tracheal structure, and a better integration of the laryngeal scaffold. The last animal developed a wound abscess and was sacrificed 80 days after surgery. We observed, in this case, a poor scaffold integration and an acute inflammatory reaction. CONCLUSIONS: From the preliminary data obtained we found that the excessive stiffness of the material, along with the anatomical features of the sheep, is a major limitation of this study. It will be necessary in the future to create a new biocompatible, more flexible and elastic graft, to achieve greater integration into surrounding tissues. Bioconstructed grafts could simplify surgery for the treatment of laryngo-tracheal stenosis, particularly in the treatment of long tracheal stenoses, which have, at the moment, very complex surgical options. LEVEL OF EVIDENCE: NA.

The Modern Surgical Approach to Pulmonary Atresia with Ventricular Septal Defect and Major Aortopulmonary Collateral Arteries.

Pulmonary atresia with ventricular septal defect and major aortopulmonary collaterals is a complex congenital heart defect that includes a heterogeneous subgroup of patients. Variation in the sources of pulmonary blood flow contributes to the complexity of the lesion and the diversity of approaches to its management. Unifocalization and rehabilitation focus on mobilization of collateral arteries and growth of native pulmonary arteries, respectively, with the ultimate surgical goal of achieving separated systemic and pulmonary circulations with the lowest possible right ventricular pressure. Regardless of the strategy, outcomes have altered the natural history of the disease, with a complete repair rate of approximately 80% and low early and late mortality rates. Given this heterogeneity of pulmonary vasculature, a tailored approach should be adopted for each patient, using all diagnostic methods currently offered by technical developments.

Reusability of P3 Facial Filter in a Pandemic Emergency: A 3D Analysis of Filter Microstructure with X-ray Microtomography Images after Dry Heat and UV Sterilization Procedures.

OBJECTIVE: Our goal is to evaluate the effects of heat and ultraviolet (UV) irradiation on P3 facial respirator microstructure. INTERVENTION: P3 facial filters were exposed to dry heat and UV sterilization procedures. METHODS: P3 facial filter samples underwent a standardized sterilization process based on dry heat and UV irradiation techniques. We analyzed critical parameters of internal microstructure, such as fiber thickness and porosity, before and after sterilization, using 3D data obtained with synchrotron radiation-based X-ray computed microtomography (micro-CT). The analyzed filter has two inner layers called the "finer" and "coarser" layers. The "finer" layer consists of a dense fiber network, while the "coarser" layer has a less compact fiber network. RESULTS: Analysis of 3D images showed no statistically significant differences between the P3 filter of the controls and the dry heat/UV sterilized samples. In particular, averages fiber thickness in the finer layer of the control and the 60° dry heated and UV-irradiated sample groups was almost identical. Average fiber thickness for the coarser layer of the control and the 60° dry heated and UV-irradiated sample groups was very similar, measuring 19.33 µm (±0.47), 18.33 µm (±0.47), and 18.66 µm (±0.47), respectively. There was no substantial difference in maximum fiber thickness in the finer layers and coarser layers. For the control group samples, maximum thickness was on average 11.43 µm (±1.24) in the finer layer and 59.33 µm (±6.79) in the coarser layer. Similarly, the 60° dry heated group samples were thickened 12.2 µm (±0.21) in the finer layer and 57.33 µm (±1.24) in the coarser layer, while for the UV-irradiated group, the mean max thickness was 12.23 µm (±0.90) in the finer layer and 58.00 µm (±6.68) in the coarser layer. Theoretical porosity analysis resulted in 74% and 88% for the finer and coarser layers. The finer layers' theoretical porosity tended to decrease in dry heat and UV-irradiated samples compared with the respective control samples. CONCLUSIONS: Dry heat and UV sterilization processes do not substantially alter the morphometry of the P3 filter samples' internal microstructure, as studied with micro-CT. The current study suggests that safe P3 filter facepiece reusability is theoretically feasible and should be further investigated.

A Simple Method to Quantify Outward Leakage of Medical Face Masks and Barrier Face Coverings: Implication for the Overall Filtration Efficiency.

Face masking proved essential to reduce transmission of COVID-19 and other respiratory infections in indoor environments, but standards and literature do not provide simple quantitative methods for quantifying air leakage at the face seal. This study reports an original method to quantify outward leakage and how wearing style impacts on leaks and filtration efficiency. The amount of air leakage was evaluated on four medical masks and four barrier face coverings, exploiting a theoretical model and an instrumented dummy head in a range of airflows between 30 and 160 L/min. The fraction of air leaking at the face seal of the medical masks and barrier face coverings ranged from 43% to 95% of exhaled air at 30 L/min and reduced to 10-85% at 160 L/min. Filter breathability was the main driver affecting both leak fraction and total filtration efficiency that varied from 5% to 53% and from 15% to 84% at 30 and 160 L/min, respectively. Minor changes were related to wearing style, supporting indications on the correct mask use. The fraction of air leaking from medical masks and barrier face coverings during exhalation is relevant and varies according to design and wearing style. The use of highly breathable filter materials reduces air leaks and improve total filtration efficiency.

Successful staged separation of total angular craniopagus.

BACKGROUND: Total craniopagus is an exceedingly rare condition in which surgical treatment is complex and potentially fatal. Over the last decades, a multistep surgical approach, which allows development of venous collateral circulation, has fostered a dramatic improvement of successful separation rates and neurological outcomes. Most of the experience derives from management of vertical craniopagus, the angular form being rarer and less amenable to successful surgical separation. METHODS: We present a case of total angular craniopagus twins observed at our Institution. Specific features included a large occipital fusion area with a bone defect, complete separation of brain and arterial vessels and a complex configuration of dural venous sinuses. The superior sagittal sinus of each twin preferentially drained to a single transverse sinus through a shared torcular. RESULTS: After an extensive diagnostic phase, including neuroimaging, tridimensional and virtual reality modelling, neurological, neurophysiological and rehabilitation assessment, a detailed multistep surgical plan, was proposed to a wide multidisciplinary team. The venous system was managed by taking advantage of the fact each twin's superior sagittal sinus was drained preferentially by the transverse sinus on the twin's left. The transverse sinuses were thus separated accordingly. CONCLUSIONS: Successful separation was achieved in three surgical steps over one year, with an excellent outcome for both twins.

Protein-protein interactions at a glance: Protocols for the visualization of biomolecular interactions.

Protein-protein interactions (PPIs) play a key role in many biological processes and are intriguing targets for drug discovery campaigns. Advancements in experimental and computational techniques are leading to a growth of data accessibility, and, with it, an increased need for the analysis of PPIs. In this respect, visualization tools are essential instruments to represent and analyze biomolecular interactions. In this chapter, we reviewed some of the available tools, highlighting their features, and describing their functions with practical information on their usage.

Bioprinting Technology in Skin, Heart, Pancreas and Cartilage Tissues: Progress and Challenges in Clinical Practice.

Bioprinting is an emerging additive manufacturing technique which shows an outstanding potential for shaping customized functional substitutes for tissue engineering. Its introduction into the clinical space in order to replace injured organs could ideally overcome the limitations faced with allografts. Presently, even though there have been years of prolific research in the field, there is a wide gap to bridge in order to bring bioprinting from "bench to bedside". This is due to the fact that bioprinted designs have not yet reached the complexity required for clinical use, nor have clear GMP (good manufacturing practices) rules or precise regulatory guidelines been established. This review provides an overview of some of the most recent and remarkable achievements for skin, heart, pancreas and cartilage bioprinting breakthroughs while highlighting the critical shortcomings for each tissue type which is keeping this technique from becoming widespread reality.

Strategies for Bone Regeneration: From Graft to Tissue Engineering.

Bone is a regenerative organ characterized by self-renewal ability. Indeed, it is a very dynamic tissue subjected to continuous remodeling in order to preserve its structure and function. However, in clinical practice, impaired bone healing can be observed in patients and medical intervention is needed to regenerate the tissue via the use of natural bone grafts or synthetic bone grafts. The main elements required for tissue engineering include cells, growth factors and a scaffold material to support them. Three different materials (metals, ceramics, and polymers) can be used to create a scaffold suitable for bone regeneration. Several cell types have been investigated in combination with biomaterials. In this review, we describe the options available for bone regeneration, focusing on tissue engineering strategies based on the use of different biomaterials combined with cells and growth factors.

The role of air conditioning in the diffusion of Sars-CoV-2 in indoor environments: A first computational fluid dynamic model, based on investigations performed at the Vatican State Children's hospital.

BACKGROUND: About 15 million people worldwide were affected by the Sars-Cov-2 infection, which already caused 600,000 deaths. This virus is mainly transmitted through exhalations from the airways of infected persons, so that Heating, Ventilation and Air Conditioning (HVAC) systems might play a role in increasing or reducing the spreading of the infection in indoor environments. METHODS: We modeled the role of HVAC systems in the diffusion of the contagion through Computational Fluid Dynamics (CFD) simulations of cough at the "Bambino Gesù" Vatican State Children's Hospital. Both waiting and hospital rooms were modeled as indoor scenarios. A specific Infection-Index (η) parameter was used to estimate the amount of contaminated air inhaled by each person present in the simulated indoor scenarios. The potential role of exhaust air ventilation systems placed above the coughing patient's mouth was also assessed. RESULTS: Our CFD-based simulations of the waiting room show that HVAC air-flow remarkably enhances infected droplets diffusion in the whole indoor environment within 25 s from the cough event, despite the observed dilution of saliva particles containing the virus. At the same time also their number is reduced due to removal through the HVAC system or deposition on the surfaces. The proper use of Local Exhaust Ventilation systems (LEV) simulated in the hospital room was associated to a complete reduction of infected droplets spreading from the patient's mouth in the first 0.5 s following the cough event. In the hospital room, the use of LEV system completely reduced the η index computed for the patient hospitalized at the bed next to the spreader, with a decreased possibility of contagion. CONCLUSIONS: CFD-based simulations for indoor environment can be useful to optimize air conditioning flow and to predict the contagion risk both in hospitals/ambulatories and in other public/private settings.

Multiparametric Imaging for Presurgical Planning of Craniopagus Twins: The Experience of Two Tertiary Pediatric Hospitals with Six Sets of Twins.

Conjoined twins are rare and pose a challenge to radiologists and surgeons. Craniopagus twins, where conjunction involves the cranium, are especially rare. Even in large pediatric centers, radiologists are unlikely to encounter more than one such event in their medical careers. This rarity makes it daunting to select a CT and MRI protocol for these infants. Using the experience of two tertiary pediatric hospitals with six sets of craniopagus twins, this multidisciplinary and multimodal integrated imaging approach highlights the key questions that need addressing in the decision-making process for possible surgical intervention.

Advanced 3D "Modeling" and "Printing" for the Surgical Planning of a Successful Case of Thoraco-Omphalopagus Conjoined Twins Separation.

BACKGROUND: The surgical separation of two Conjoined Twins is a particularly complex operation. Surgical times are particularly long and post-operative complications are very frequent in this type of procedure. We report a clinical case of surgical separation of two thoraco-omphalopagus conjoined twins in which, thanks to the use of (3D) three dimensional technologies, we were able to significantly reduce operative times and improve clinical outcomes. METHODS: We performed a 3D reconstruction of the anatomical parts involved in congenital fusion using Computer Tomography (CT) images.We obtained virtual anatomical models of the patients which allowed us to estimate essential details as the residual post-operative thoracic volume as well as the exact position of resection planes for both the general separation and for the hepatic splitting procedure. Subsequently, we printed 3D anatomical models of the thoracic cage and sternum and of the liver with the plane of resection. Finally, we printed an additional 3D anatomical model of the two patients representing different organs with multiple colors and materials. RESULTS: The use of 3D printing reduced the duration of surgery by 30% with a favorable patient outcome. Two years after the operation, the patients do not present any type of deficit and have a normal life without any significant complication. CONCLUSION: Virtual anatomical 3D models and 3D printing represent a valid technological tool to support complex surgical operations, especially in pre-surgical planning. 3D models are important tools to better understand complex anatomy and to discuss clinical cases among members of the surgical team.

Quantitative Assessment of Parenchymal Involvement Using 3D Lung Model in Adolescent With Covid-19 Interstitial Pneumonia.

Background: Amount of parenchymal involvement in patients with interstitial pneumonia Covid-19 related, seems to be associated with a worse prognosis. Nowadays 3D reconstruction imaging is expanding its role in clinical medical practice. We aimed to use 3D lung reconstruction of a young lady affected by Sars-CoV2 infection and interstitial pneumonia, to better visualize, and quantitatively assess the parenchymal involvement. Methods: Volumetric Chest CT scan was performed in a 15 years old girl with interstitial lung pneumonia, Sars-CoV2 infection related. 3D modeling of the lungs, with differentiation of healthy and affected parenchymal area were obtained by using multiple software. Results: 3D reconstruction imaging allowed us to quantify the lung parenchyma involved, Self-explaining 3D images, useful for the understanding, and discussion of the clinical case were also obtained. Conclusions: Quantitative Assessment of Parenchymal Involvement Using 3D Lung Model in Covid-19 Infection is feasible and it provides information which could play a role in the management and risk stratification of these patients.

Anomalous aortic origin of the pulmonary arteries: Case series and literature review.

Anomalous origin of the pulmonary arteries from the ascending aorta is a rare, but severe clinical entity necessitating a scrupulous evaluation. Either the right or the left pulmonary arteries can arise directly from the ascending aorta while the other pulmonary artery retains its origin from the right ventricular outflow tract. Such a finding can be isolated or can coexist with several congenital heart lesions. Direct intrapericardial aortic origin, however, must be distinguished with origin through a persistently patent arterial duct. In the current era, clinical manifestations usually become evident in the newborn rather than during infancy, as used to be the case. They include respiratory distress or congestive heart failure due to increased pulmonary flow and poor feeding. The rate of survival has now increased due to early diagnosis and prompt surgical repair, should now be expected to be at least 95%. We have treated four neonates with this lesion over the past 7 years, all of whom survived surgical repair. Right ventricular systolic pressure was significantly decreased at follow-up. Our choice of treatment was to translocate the anomalous pulmonary artery in end-to-side fashion to the pulmonary trunk. Our aim in this report is to update an Italian experience in the diagnosis and treatment of anomalous direct origin of one pulmonary artery from the aorta, adding considerations on the lessons learned from our most recent review of the salient literature.